| Mill Stand Style and Size | QVW-150 | QVW-200 | QVW-250 | |||
| Roll Space, in. (mm) | 8.000 | (203.2) | 13.000 | (330.2) | 15.000 | (381.0) |
| Maximum Strip Width, in. (mm) | 7.000 | (177.8) | 12.000 | (304.8) | 14.000 | (355.6) |
| Maximum Strip Gauge, in. (mm) | 0.062 | (1.6) | 0.094 | (2.4) | 0.125 | (3.2) |
| Roll Shaft Diameter, in. (mm) | 1.500 | (38.1) | 2.000 | (50.8) | 2.500 | (63.5) |
| Horizontal Centers, in. (mm) | 11.000 | (279.4) | 15.000 | (381.0) | 18.000 | (457.2) |
| Vertical Centers, in. (mm) Equal Min. | 4.000 | (101.6) | 4.750 | (120.7) | 5.750 | (146.1) |
| Max. | 7.000 | (177.8) | 8.000 | (203.2) | 10.000 | (254.0) |
| Vertical Centers, in. (mm) Unequal Min. | 4.125 | (104.8) | 4.750 | (120.7) | 5.750 | (146.1) |
| Max. | 7.000 | (177.8) | 8.000 | (203.2) | 10.000 | (254.0) |
| Unequal Gearing Ratio, Top:Bottom Shafts | 1.43 : 1 | 1.33 : 1 | 1.30 : 1 | |||
| Worm Gearing Ratio | 7.67 : 1 | 10.33 : 1 | 10.00 : 1 | |||
| Standard Mill Speed, FPM (MPM) | 100 (30.5) | |||||
*Note: Standard metal lines are 42" (1,067mm) unless otherwise requested.