FMCMCIIFN
Home
About
Inventory
Lines
Docs
Surplus
Tax
Leasing
Search
Location
Contact

RapidAir
Rapid-Air Loop Controls




LLS & LLP Series Double Lo-Loop Space-Saver, payout or rewind (patent pending).
An entirely new way of looking at the placement of equipment in a stamping plant. With many types and sizes of material it is now possible to place a reel of material very close to a feed mounted on a press and still maintain a substantial amount of material in reserve for interference free feeding of material. It is also now possible to feed directly from a non-powered reel without a concern for slippage caused by the high jerk created by the speed of feeding from a high inertial load of material on the reel. The Rapid-Air Lo-Loop keeps the reel moving at the proper speed of rotation needed for smooth operation. Available for reels listed below. Patented.


Conventional Loop: Shown is a conventional arrangement of a press, feed, straightener and reel of material. Note the amount of linear floor space used by the loop between the reel and the straightener and also between the straightener and the feed.



Rapid-Air Lo-Loop: The Rapid-Air Lo-Loop was developed to be used with the Rapid-Air KBX servo feed and straightener combo units as shown here. Notice that the loop is contained entirely within the footprint of the reel and press, saving a considerable amount of space. As with all Rapid-Air reels material can be fed into the press from right to left or left to right. Additionally, with most materials they can be set to provide material with slitting burr up or down.


100 Series


1000 Series

RAPID-AIR LOOP CONTROL MODEL SELECTION
Model Description Used With
RS1 Rapid-Sense Ultrasonic Loop Control Reels, Straighteners & Power Rolls
RTB Rapid-Touch Loop Control with Base Mounting Reels, Straighteners & Power Rolls
RTA Rapid-Touch Loop Control with Arm Mounting Reels, Straighteners & Power Rolls
RLL46 Rapid-Light Infrared Light Loop Control Reels, Straighteners & Power Rolls
LLSEC Double Lo-Loop Spring Tension Control - Powered 100 Series Reels 100 Series - Reels + Straightener Reel Combos
LLSEM Double Lo-Loop Spring Tension Control - Powered 1000 Series Reel 1000 Series - Reels + Straightener Reel Combos
LLSNC Double Lo-Loop Spring Tension Control - Non-Powered 100 Series Reel 100 Series - Reels + Straightener Reel Combos
LLSNM Double Lo-Loop Spring Tension Control - Non-Powered 1000 Series Reel 1000 Series - Reels + Straightener Reel Combos
LLPEC Double Lo-Loop Air Tension Control - Powered 100 Series Reels 100 Series - Reels + Straightener Reel Combos
LLPEM Double Lo-Loop Air Tension Control - Powered 1000 Series Reel 1000 Series - Reels + Straightener Reel Combos
LLPNC Double Lo-Loop Air Tension Control - Non-Powered 100 Series Reel 100 Series - Reels + Straightener Reel Combos
LLPNM Double Lo-Loop Air Tension Control - Non-Powered 1000 Series Reel 1000 Series - Reels + Straightener Reel Combos
LLR1C Single Actuating Arm Remote Control - Powered 100 Series 100 Series - Reels + Straightener Reel Combos
LLR1M Single Actuating Arm Remote Control - Powered 1000 Series 1000 Series - Reels + Straightener Reel Combos



Major Tax Incentive For New Equipment Orders


Request Literature


RapidAir | Air Feed | Servo Feed | Stock Straightener | Stock Reel | Coil Lift | Machine Bases | Transporter
Pallet Master Decoiler | Stock Cutter | Stock Cutter Models | Cut-To-Length Systems | Mini-Press | Complete Systems
Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact
Copyright © 2008 Machinery Consultants, Inc., all rights reserved.
1854 Business Center Drive · Duarte, CA 91010
Main Office: (626) 359-1944 · Orange County: (949) 481-6903 · Fax: (626) 359-4055
Terms of Service · Privacy Policy