TS Shear
All HACO shears are recognized for being well-built, accurate and cost-effective, meeting the demand for the high-precision sheet metal and heavy fabrication market, to run small- or high-volume production. All our TS shears are equipped with power rake angle adjustment from the SP 8 control panel and quick blade gap adjustment. Both 6 and 12mm models are available with our SC70 CNC controls (TSX types). These machines are delivered with an extensive range of standard features. The TS/TSX series shears remain the pacesetters in the price/quality ratio market of today. With thousands of units running day after day all over the world, we are convinced of the durability and craftmanship of these machines
Standard
- Hydraulic motor-pump group arranged at the back of the machine, easily accessible and protected by a sheet.
- 2 under driven cylinders. Electro-hydraulic adjustment of the rake angle by push buttons in the control panel.
- All operator controls are conveniently located at the left-hand side of the machine within the immediate reach of the operator.
- The standard SP8 control offers the following functions: automatic positioning of the backgauge to the preselected position with digital read-out, stroke control and selection for backgauge retraction.
- Quick blade gap setting - on 6mm-models by one easily accessible lever at the front of the machine.
- Tilting sheet holddowns, pressure of which is independent from the shearing pressure, in order to clamp properly each sheet thickness. These holddowns are arranged more closely on the left and the right hand side to conveniently cut small sheets.
- Hydraulic and electric overload protection.
- 4 edged cutting blades.
- On 6mm models, motorised backgauge stroke 750mm.
- On 12mm models, swing-away backgauge stroke 1000mm
- Shearing table with a number of square iron blocks, for easy the sheet feed-in and increasing drastically operator’s safety.
- Squaring arm of 1000mm, with scale, T-slot and disappearing stop, attached to the left side of the machine.
- Movable footpedal control.
- Filled oiltank.
- Instruction and maintenance manuals.
- Service tools
Range: TS(X) 2006, TS(X) 3006 and TS(X) 3012
Options
SC70 control
 HSL executed with the optional SC70 control is called HSLX.
Basic features of the SC70 control :
- LCD screen with 16 lines of 26 characters.
- Memory capacity : max 200 programs with max. 400 steps max 127 steps per program. material list of max. 32 materials
- Each program contains the basic cutting parameters such as material type, material thickness, blade gap and cutting angle setting
- Electro-hydraulic blade gap setting by 2 cylinders.
- Stroke control adjustment.
- Automatic programmable retraction of the back gauge.
- Possibility of motorized adjustment of the back gauge position by 2 push-buttons.
- Backlash compensation.
- Mode selection Inch-Metric.
Programming modes :
- Semi-automatic : By entering the sheet thickness for mild steel, the control automatically sets the blade gap and the cutting angle as a function of the sheet thickness. All parameters can be manually modified according to the actual data.
- Manual : All cutting parameters such as material type, sheet thickness, cutting angle and blade gap are programmed manually.
Squaring arms and front support arms.
Squaring arms and front support arms with or without scale, T-slots and flip-over stop. Lengths from 1.000 up to 3.000 mm.
Ball transfers in the iron table blocks.
Ball transfers mounted on the iron table blocks, for easy feed-in of the sheets.
Movable pendant control panel (only available for SC7 control)
Protractor for angle shearing.
Protactor for angle shearing
Knives for cutting stainless steel
Hand Safety Guard with hand gaps
Different backgauge types
The backgauges consists of 2 rigid arms (containing guides and control spindle) and the parallel adjustable backgauge bar. This asembly assures a precise positionning of the sheet. Swing-up and swing-away types enable cutting of sheets longer than the standard stroke length. Motorised positioning with the SP8 preselection control or programmable positioning with the SC7 control. Digital read-out of the actual and preselected or programmed position => for more info see Key Features
Safety fences and light beams at the rear of the machine (standard for countries requiring the CE safety specifications)
Features
Backgauges
The backgauge consists of 2 rigid arms (containing guidings and control spindle) and the parallel adjustable backgauge bar. This assembly assures a precise positioning of the sheet. Swing-up and swing-away types enable cutting of sheets longer than the standard stroke length. Motorised positioning with the SP8 preselection control or programmable positioning with the SC70 control. Digital read-out of the actual and preselected or programmed position.
Motorised Backgauge
- Lateral movement front to back
- Standard on 6, 8 and 10mm models
- Power backgauge stroke 750mm
- Expandable in option to 1000mm
Swing-up Backgauge
- Power backgauge stroke 820mm
- Available as option on 3m, 6 and 8mm models
- When the backstop runs backwards, it will mechanically lift up to cut longer sheets
- Also expandable to 1000mm stroke with lifting up feature
Swing-away Backgauge
- Power backgauge stroke 1000mm.
- Standard on all 13 and 16mm models
- Available as option on 4m- 6 and 8mm and all 10mm models
- When removing the axis in both carriers and run the backstop backwards, the complete carrier will swing away to the back, enabling to cut longer sheets
Hydraulics
Blade Gap
Our quick blade gap adjustment is located conveniently in front of the machine (on 6mm-models) or at the rear of the machine (on 12mm models) Adjustment ranges from 0,05mm blade gap for very light sheet thicknesses and progressively increases for heavier thicknesses up to the maximum shear cacity.
Adjustable Rake Angle
Electro-hydraulic adjustment of the rake angle by push buttons at the control panel, with digital read-out, allows thin material to be cut at less angle, minimizing deformity of the sheared stock.
Hydraulics
TS shears are bottom driven by 2 pull-down cylinders. The hydraulic system consists of a motor pump group and a multi-function hydraulic manifold block, conveniently located at the rear of the machine. This compact assembly brings valves and hoses together thus simplifying the system and eliminating troublesome leaks. The connections to the cylinders, the holddowns and pumps are by means of flexible hoses. Two high pressure relief valves protect the holddowns and the cutting cycle from overload. Oversized oiltank for trouble-free production shearing
Controls
SP8
The SP8 preselection control offers the following functions :
- positioning of the backgauge to the preselected position
- digital read-out of the actual position
- cutting angle setting with digital read-out
- stroke control (cutting length regulation)
- selection for backgauge retraction
- stroke counter and counter of working hours in the parameters.
SC70 control
HSL executed with the optional SC70 control is called HSLX.
Basic features of the SC70 control :
- LCD screen with 16 lines of 26 characters.
- Memory capacity : max 200 programs with max. 400 steps max 127 steps per program. material list of max. 32 materials
- Each program contains the basic cutting parameters such as material type, material thickness, blade gap and cutting angle setting
- Electro-hydraulic blade gap setting by 2 cylinders.
- Stroke control adjustment.
- Automatic programmable retraction of the back gauge.
- Possibility of motorized adjustment of the back gauge position by 2 push-buttons.
- Backlash compensation.
- Mode selection Inch-Metric.
Programming modes :
- Semi-automatic : By entering the sheet thickness for mild steel, the control automatically sets the blade gap and the cutting angle as a function of the sheet thickness. All parameters can be manually modified according to the actual data.
- Manual : All cutting parameters such as material type, sheet thickness, cutting angle and blade gap are programmed manually.
Specifications
| - |
2006 |
3006 |
3012 |
| Capacity mild steel (400N/mm²) |
6 mm |
6 mm |
12 mm |
| Capacity stainless steel (700N/mm²) |
3 mm |
3 mm |
6 mm |
| Cutting length |
2050 E mm |
3050 E mm |
3050 E mm |
| Angle adjustment |
0,5-3 degrees |
0,5-3 degrees |
0,5-3 degrees |
| Number of plate holddowns |
13 |
18 |
18 |
| Number of strokes / min. |
38640 |
38578 |
38547 |
| Length squaring arm |
1000 mm |
1000 mm |
1000 mm |
| Stroke Backgauge mot version |
750 mm |
750 mm |
- - - mm |
| Stroke Backgauge Sub version |
820 mm |
820 mm |
--- mm |
| Stroke Backgauge Sub version |
--- mm |
- - - mm |
1000 mm |
| Working height |
770 mm |
770 mm |
900 mm |
| Motorpower |
7,5 kW |
7,5 kW |
22,5 kW |
| Length |
2800 mm |
3800 mm |
4200 mm |
| Width (without CE Safety fences) |
1650* mm |
1650* mm |
2030** mm |
| Width (including CE Safety fences) |
2700* mm |
2700* mm |
2800** mm |
| Height |
1700 mm |
1700 mm |
2030 mm |
| Approx Weight |
3500 kgs |
4500 kgs |
8500 kgs |
|
