   |
Home |
About |
Inventory |
Lines |
Docs |
Surplus |
Tax |
Leasing |
Search |
Location |
Contact |
 |
 The HACO Single Head CNC Punching Machine Speedmaster 312 is based on over 40 years of experience in the manufacturing of CNC punching machines. With its 30 tons hydraulic punching capacity, Y-axis (throat) of over 1300 mm and punching speed of up to 600 HPM, the Speedmaster 312 is the perfect machine for low-cost production of single parts as well as large production runs. The Speedmaster 312 gives the unique opportunity to enter the world of CNC sheet metal punching without high investments but also without the compromise of a conventional low-cost machine. Its optimum price/quality relation translates itself into a profitable investment. Standard
OptionsTrumpf tooling conceptThe standard tool holder(s) can only take HACO/OMES tooling, but we can also offer tool holder(s) for TRUMPF style punches and dies. CAD/CAM software with manual or automatic nestingSupplementary sheet support tablesTool grinding machine  The Punch and Die Grinder comprimises a cast aluminium base, a support column, and a swing arm which carries the grinding wheel assembly. The base carries 2 chucks (a 3-jaw chuck, fitted with standard and reversible jaws, and a magnetic chuck) which enable a wide variety of punches and dies to be held securely. The support column carrying the swing arm is mounted in high quality pre-lubricated bearings. The column is shielded to exclude grinding dust. The shield also acts as a radial stop to limit the travel of the swing arm so that the machine does not topple over when it is not bolted down. The cup grinding wheel is driven by a 1 HP 3-phase 380/420 V - 50 HZ electric motor and is fed smoothly on to the workpiece by means of a handwheel which is graduated in thousands of an inch. The grinder is fitted with a straight cut wheel suitable for grinding hardened steel. Replacement grinder wheels are available. The Tool Grinder also consists of a reservoir tank with a fully submersible pump and trap. The splash tray has a hinged lifting front section for easy access. Adjustment of the coolant flow is simple. To obtain a sharp cutting edge on a punch or die, the punch must be placed in the 3-jaw chuck or the die on the magnetic chuck. With the wheel rotating, the head must be brought down manually until a light cut occurs. Then proceed with further light cuts until a sharp edge is produced. All OMES and TRUMPF punches and dies, purchased with or for your HACO/OMES Omatic CNC Punching Machine can be sharpened. The Tool Grinder comes standard with a ‘Shear Grinding Jig’ which enables up to 10% of roof top, single or double shear to be ground on punches. Shipping specifications (packed)
Multitool Unit with 6 stations To increase the flexibility of the machine and reduce tool changes, a Multitool Unit with 6 stations can be used. Each Multitool station can have 6 tools up to 16 mm diameter or diagonal. Punch ToolingWe can offer a wide range of standard and special CNC Punch Tooling, manufactered to the highest standards. The standard tool holders take the OMES style tooling, but tool holders for Trumpf style tooling can be offered as an option.  The HACO Tool Concept is both simple and practical. The stripper plate is attached to the punch holder and thus also serving as a hold-down during the punching process, resulting in much flatter workpieces.  Multitool Rotation Axis With this option, the machine automatically rotates the Multitool Unit to select the programmed punch and die. CE Optical Safety SystemA CE-approved optical system secures the entire working area of the machine by means of 2 infra-red beams. The system covers 3 sides of the machine, the 4th side should be covered by a wall or a fence (put up by the end user). FeaturesProductivity through flexibilityLarge and fully brushed punching tablesOn the large standard brush tables, various workpieces can be nested on standard sheet sizes. The AC-servo driven X- and Y-axis with resp. stroke of 1500 by 1000 mm (Punchmaster 310) or by 1300 mm (Punchmaster 312) and the 2 standard hydraulic sheet clamps ensure the highest accuracy on all workpieces.  The standard manual toolchange with quick hydraulic clamping assures fast and accurate changing of tools. Punching CapacitiesSimple as well as complex workpieces can be produced with the Punchmaster, due to its flexibility in programming and use. Tools with a diameter or diagonal up to 70 mm can be installed in the 30 tons capacity punching head. Optional Tool Change TurretAn optional tool change turret with 4 stations eases the tool change and reduces tool change times down to a minimum. All turret stations can take any tool or Multitool. In this way, the Punchmaster can be turned into a CNC turret machine with up to 24 tools. Use of MultitoolsTo increase even more the flexibility of the Punchmaster, a Multitool with 6 punches and dies (maximum diameter or diagonal of 16mm) can be used. The Multitool Unit can be rotated manually. With the optional Multitool Rotation Axis, the Multitool Unit will be rotated automatically without any intervention by the operator.  ControlsUser-friendly graphical programming with the standard TPC25 Graphics. The user-friendly character of the standard TPC25 Graphics control allows even those operators just starting to use CNC punch presses to learn the programming in no time. With the TPC25 Graphics software, the punching / nibbling patterns can be programmed graphically, and the NC programme is then generated automatically (ISO-code).  The clear and simple graphical tool editor eases the use of normal tools as well as Multitools.  Manual nesting of workpieces is standard on the TPC25 Graphics control, even several parts can nested on the same sheet. The tool-optimised program is then automatically generated. Specifications
|
|
Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | ContactCopyright © 2012 Machinery Consultants, Inc., all rights reserved.
1854 Business Center Drive · Duarte, CA 91010 Main Office: (626) 359-1944 · Orange County: (949) 481-6903 · Fax: (626) 359-4055 Terms of Service · Privacy Policy |