Tooling

Tooling Services

The reason that Kingsland Steelworkers and Punching machines re so versatile in use, is due to our extensive range of accessories and tooling developed over 4 decades of manufacturing experience. This wealth of experience and knowledge is available to all of our customers. A free CAD tooling design centre is at your service to produce tooling to suit your specific requirements.

Kingsland Punches and Dies

A Huge variety of shapes and sizes are kept in permanent stock at our Sheringham manufacturing site, available for same day delivery.

Kingsland Punches and Dies are manufactured from high quality tool steel using the latest CNC technology, and are double vacuum heat treated to ensure a long and productive working life punching mild or stainless steel.

In addition to producing all of our own tooling we also manufacture punches and dies to suit most other well known machines.

Round Up to 19mm Up to 30mm 31 to 38mm Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm 111 to 135mm 136 to 160mm 161 to 190mm 191 to 225mm
Square Ranges : Square Up to 21mm 22 to 26mm Up to 26mm 27 to 40mm 41 to 60mm 61 to 77mm 78 to 95mm 96 to 113mm 114 to 134mm 135 to 159mm
Elengated Ranges : Length Up to 30mm 31 to 38mm Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm 111 to 135mm 136 to 160mm 161 to 190mm 191 to 225mm
Rectangular Ranges : Accr. Corn. Up to 29mm 30 to 38mm Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm 111 to 135mm 136 to 160mm 161 to 190mm 191 to 225mm
Hexagonal Ranges : Accr. Corn. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Star shaped Ranges : Accr. Corn. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Triangular Ranges : Circle Dia. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Flat round Ranges : Dia. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
D shape Ranges : Dia. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Round with flat Ranges : Length Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Rectangle with radius corners Ranges : Accr. Corn. Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Mono Lobe / Keyhole Ranges : Length Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Due Lobe / KeyholeRanges : Length Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm
Radial slot Ranges : Length Up to 38mm 39 to 57mm 58 to 85mm 86 to 110mm

Punch End Notching

Round Ranges : Length Up to 25mm 26 to 38mm 39 to 60mm 61 to 80mm
Square end Ranges : Depth Up to 22mm 23 to 30mm 31 to 48mm 49 to 62mm
Vee Ranges : Depth Up to 25mm 26 to 38mm 39 to 60mm 61 to 80mm
Corner radius Ranges : Radius Up to 16mm 17 to 30mm 31 to 48mm 49 to 65mm
Tube Notching Ranges : Outs. Dia. Up to 30mm 31 to 50mm 51 to 80mm 81 to 100mm 31 to 50

Punch End Cropping

Single radius crop Ranges : Width Up to 16mm 17 to 25mm 26 to 50mm 51 to 75mm
Double radius crop Ranges : Width Up to 16mm 17 to 25mm 26 to 50mm 51 to 75mm
Double rad. crop & pierce Ranges : Width Up to 16mm 17 to 25mm 26 to 50mm 51 to 75mm

Note:

For single radius, double radius and double radius crop & pierce from 26 mm bar width upwards a special Bolster Centre Plate required for each size of tool

For single radius and double radius crop & pierce, all tools require a Stripper Guide

Offest / Eccentrics

Round Ranges : Dia. Up to 30mm 31 to 38mm 39 to 55mm 56 to 70mm
Slot - 'A' position Ranges : Fr. to back Up to 30mm 31 to 38mm 39 to 55mm 56 to 85mm 86 to 110mm
Slot - 'B' position Ranges : Side to side Up to 30mm 31 to 38mm 39 to 55mm 56 to 70mm

Taper Top Dies

Round Ranges : Dia. Up to 38mm
Round offset Ranges : Dia. Up to 22mm
Elongated Ranges : Length Up to 38mm
Elongated offset Ranges : Length Up to 30mm

Special tooling:

Round, Square and Elongated punches and dies not shown on our Stock List but within the ranges mentioned, can be supplied as "special" manufacture.

"Long Reach / Extended length" punches are available (please specify length).

Note:

When ordering ELONGATED, RECTANGULAR or RADIAL SLOT tooling - please supply the LENGTH and WIDTH of the tool required.

For TUBE NOTCH tooling - please advise the Outside Diameter and wall thickness of the tube.

If you are unable to find the tooling you require in this list, or if you have a specific requirement, please contact our computer aided tooling design department who are able to advise on, and design bespoke tooling to suite a wide range of specialist applications.

All tooling is manufactured 'In House' on dedicated CNC machines by our team of experienced engineers.

Major Tax Incentive For New Equipment Orders

Request Literature

Consider pre-owned alternatives?

• Atlantic 10 X 1/2 Hydraulic Shear
• Atlantic 45 Hydraulic Brake
• Atlantic HDE 10 X 1/2 Hydraulic Shear
• Atlantic HDE 120-10-8 Hydraulic Brake
• Atlantic HDE-22512 Hydraulic Brake
• Atlantic HDS Hydraulic Shear
• Haco Euromaster PPES 45 5 35 Press Brake

Haco | Press Brakes | Shears | Notchers | Punches | Lasers | Plasma Cutting | Roll Bending | Sheet Metal Software | Ironworkers

Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact