Punching Machines

The Kingsland range of Hydraulic Punching Machines all come equipped with a deep throat of 625mm as standard. Heavy-duty support tables with scales and backstops, universal die holder for punching in plate, flat bar, angle iron and flange of channel and beam are all part of the standard execution. The Kingsland Hydraulic Punching machines are also available in double-ended execution, using a shared frame and thus saving space and money. A second machine is no longer needed for doubling the capacity and productivity. Both ends of the machine can be used at the same time up to maximum capacity. The punching machines are available from 60 ton to 175 ton, both in single-ended as well in double-ended execution! Furthermore, tooling from competitors machines and or other brand-names can be used without special machine-modifications. The standard machine comes equipped with a deep throat (single ended version) and universal die-bolster, punching up to 57mm diameter/slot. The front part of the table can be removed in order to punch in large format angle-iron.

Standard

• Full stroke adjustment.
• Low power inching and adjustable stroke.
• Universal die bolster punching up to 57mm as standard.
• Large punch table with multi-purpose bolster – removable table block for overhang channel / joist flange punching.
• Machines with very low maintenance requirements.
• Wide variety of applications – for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press application, etc.
• Deep throat depth as standard.
• Overload relief on hydraulic system.
• Interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment.

• Punch adaptors
• Swing away punch stripper unit
• Easy change punch holder
• Universal die bolster
• Heavy-duty punch table with scales, guide and backstop
• Service toolkit
• Work station guard
• Instruction, operating and maintenance manual
• Hydraulic oil fill

Options

Minimum Deform Stripper Assembly

The minimum deform stripper assembly gives minimum deformation while punching close pitch holes in flat bar.

Quick-Change Punch Holder

Only needs to turn the punch holder by 90° to lock into position. Available up to 38mm capacity

Sheet bending unit

Sheet bending unit with multi V block.

Flat bar bending unit

Flat bending unit for bending material up to 10mm thickness with single V block.

Large Corner Notch Attachment

Large corner notch attachment to fit on the punching station.

Die bolster for punching webs of Channel/Beam section

Specially designed web bolster for punching in the web of channel or beam. Bolsters for special profiles available on demand.

Swan neck bolster for web and flange punching.

Dovetail assembly

changing from punching to bending in only 20 seconds.

Twin hole varialbe pitch unit

Twin hole variable pitch unit. Punches 2 holes up to 29mm dia.

Large Hole / Slot Attachment up to diam. 225 mm

CNC-controlled positioning table

Punching of plates, flat steel, in the web of channel and on the flange of channel and I-beams. The table is delivered with an easy to operate control and TDC screen. The standard M 200 CNC-control system or optional M 600 controller with graphical simulation of the hole pattern ensure the required accuracy within a hole pattern with several gauge lines. Especially advantageous is the repeatability accuracy. The use of labour intensive manual layout is no longer required. Available for deep throat machines.

Louvre Punch Unit

Special punch unit for punching ventilation applications. 3 Louvres - 100mm long or 180mm long.

Rectangular Notch Unit

Vee Notch Unit

For triangular notching purposes, the standard notch station can be replaced by a v-notch unit. The V-notch unit is available in various angles, up to 90°.

Adjustable Roller Material Supports

Four anti-vibration machine mounts (size N°1)

Automatic Tool Lubricating System with 2 flexible nozzels on magnetic mounts (requiers an air supply)

Multi-stop table available on Deep throat machines.

Multi-stop table

Fitted to 625mm throat only

3m Convoyer x 600mm wide, adjustable supports and lockable wheels.

Specifications

Major Tax Incentive For New Equipment Orders

Request Literature

Consider pre-owned alternatives?

• Atlantic 10 X 1/2 Hydraulic Shear
• Atlantic 45 Hydraulic Brake
• Atlantic HDE 10 X 1/2 Hydraulic Shear
• Atlantic HDE 120-10-8 Hydraulic Brake
• Atlantic HDE-22512 Hydraulic Brake
• Atlantic HDS Hydraulic Shear
• Haco Euromaster PPES 45 5 35 Press Brake

Haco | Press Brakes | Shears | Notchers | Punches | Lasers | Plasma Cutting | Roll Bending | Sheet Metal Software | Ironworkers

Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact