FMCMCIIFN
Home
About
Inventory
Lines
Docs
Surplus
Tax
Leasing
Search
Location
Contact

Haco
Ironworkers MULTI Range

The Kingsland Multi range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for a long working life.

These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations. Comprehensive safety guards are fitted as standard on all work stations.

Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations.

The system gives accurate power inching at all five work stations and allows the machine to e stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.

Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.

An optional ‘Production Pack’ is available to enhance the machine specification, this includes: 1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.

MULTI 60 70 80 95 125 175
Punch station X X X X X X
Angle station X X X X X X
Section cutting station X X X X X X
Shearing station X X X X X X
Notching station X X X X X X

Standard

  • Large punch table with multi-purpose bolster – removable table block for overhang channel /joist flange punching.
  • Punch table, shear table an notch table standard equipment
  • Non-tiltable and as thus wear-free-angle-cutting blades
  • Power inching and adjustable strokes at punch & shear end
  • Centralised pressure lubrication
  • Wide variety of applications – for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications …
  • Large throat depth at the punching station –extra deep throat models available
  • Mitre cut flanges of angle under shear blade
  • Alternative rectangular / vee notching facility
  • Work station guards standard fitment
  • Two cylinder operation
  • Overload relief on hydraulic system
  • Interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment.
  • Machines with very low maintenance
MULTI 60 70 80 95 125 175
Punch and die d 22 d 22 d 22 d 22 d 24 d 26
Section blades: - round 16, 25, 45 16, 25, 45 16, 25, 45 20, 30, 50 20, 40, 55 20, 25, 30, 40, 65
Section blades: - square 20, 45 20, 45 20, 45 30, 50 30, 40, 55 25, 40, 55
  • Punch adaptors
  • Swing away punch stripper unit
  • Easy change punch holder
  • Universal die bolster
  • Heavy-duty support tables with guides at shear station and notch station
  • Heavy-duty punch table with guides and backstop
  • Curved shear arm blade with 2 (optional:4) cutting edges
  • Shear body blade with 4 cutting edges
  • Section arm & body blade with 1 cutting edge
  • Angle cutting arm & body blades with 4 cutting edges
  • Rectangular notch bolster blades with 4 cuttings edges
  • Service toolkit
  • Work station guards
  • Instruction, operating and maintenance manual
  • Hydraulic oil fill

Options

Minimum Deform Stripper Assembly

The minimum deform stripper assembly gives minimum deformation while punching close pitch holes in flat bar.

Quick-Change Punch Holder

Only needs to turn the punch holder by 90° to lock into position. Available up to 38mm capacity

Sheet bending unit

Flat bar bending unit

Flat bending unit for bending material up to 10mm thickness with single V block.

Large Corner Notch Attachment

Large corner notch attachment to fit on the punching station.

Die bolster for punching webs of Channel/Beam section

Specially designed web bolster for punching in the web of channel or beam. Bolsters for special profiles available on demand.

Swan neck bolster for web and flange punching.

Dovetail assembly

changing from punching to bending in only 20 seconds.

Twin hole varialbe pitch unit

Large Hole / Slot Attachment up to diam. 225 mm

CNC-controlled positioning table

Punching of plates, flat steel, in the web of channel and on the flange of channel and I-beams. The table is delivered with an easy to operate control and TDC screen. The standard M 200 CNC-control system or optional M 600 controller with graphical simulation of the hole pattern ensure the required accuracy within a hole pattern with several gauge lines. Especially advantageous is the repeatability accuracy. The use of labour intensive manual layout is no longer required. Available for deep throat machines.

Specific section blades

Special blades for cropping either Channel, I Beam, T profiles, square or rund bar. Blades for many different and special profiles available on demand. These application need special holddown plate.

UPN/IPN flange notch unit (rectangular)

Vee Notch Unit

For triangular notching purposes, the standard notch station can be replaced by a v-notch unit. The V-notch unit is available in various angles, up to 90°.

Punching Attachment

Blades for chamfering application

Specially designed blades and holddown for chamfering applications. With this specialequipment it is possible to cut 45° chamfers at the edge of flat plate, thus eliminating the need for special machinery. Specially designed for welding applications.

1, 2 and 3 Metre Touch and Cut Ruled Length Stop with end support

The (optional) Touch and Cut ruled length stop can be used for the angle cutting, section cutting and shear station.

Adjustable Roller Material Supports

Four anti-vibration machine mounts (size N°1)

Automatic Tool Lubricating System with 2 flexible nozzels on magnetic mounts (requiers an air supply)

Multi-stop table available on Deep throat machines.

3m Convoyer x 600mm wide, adjustable supports and lockable wheels.


Features

Punch Station

The large punch be area has a removable front and is designed to give a very wide range of punching applications. A punch table with rules and guides for repetition work are fitted as standard equipment.

Angle Station

This station provides large capacity angle cutting at 90° and 45°. Angles between 45° and 90° can be achieved by first cutting at 90° and then flange trimming to the required angle in the shearing station.

Section Cutting Station

The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, in this aperture, channel, joist, T-sections and many other special profiles.

Shearing

The shearing unit is fitted with a simple robust holddown which is adjustable to any thickness of material within the cutting capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45° for flat bars or to trim the flanges of angle.

Notching Station

The notching station is fitted as standard with a rectangular notch table with adjustable back stops, allowing repetitive positioning.


Specifications

- Multi 60 Multi 70 Multi 80 Multi 95 Multi 125 Multi 175
Punching - - - - - -
Maximum capacity 29 x 15 26 x 20 28 x 20 27 x 25 35 x 25 40 x 32
Diameter x thickness 57 x 8 57 x 9 57 x 10 57 x 12 57 x 16 57 x 22
Stroke length 55 55 55 80 80 80
Standard throat depth 305 305 305 355 355 625
Deep throat model 625 625 625 625 625 625
Largest hole (std. equipment) 57 57 57 57 57 57
Largest hole (optional) 160 160 160 160 255 255
Max. section 305 305 305 305 305 380
Working height 1030 1030 1087 1039 1056 1134
Shearing - - - - - -
Flat bar - max. thickness 230 x 20 300 x 20 300 x 20 380 x 20 380 x 25 380 x 30
Flat bar - max. width 375 x 10 375 x 15 450 x 15 480 x 15 600 x 15 600 x 20
Angle flange trim - max 45° 100 x 15 100 x 15 100 x 15 120 x 15 120 x 15 120 x 15
Working height 890 890 890 890 900 900
Angle cutting - - - - - -
90° cut 130 x 13 130 x 13 150 x 13 150 x 15 150 x 18 200 x 20
45° mitre ( true int. / ext. ) 70 x 10 70 x 10 70 x 10 80 x 10 80 x 10 80 x 10
Working height 1130 1130 1155 1155 1160 1160
Section cutting - - - - - -
Round / Square 45 45 45 50 55 65 / 55
Channel / beam (*) 130 x 65 130 x 65 130 x 65 160 x 90 200 x 100 300 x 125
Tee (*) 90 x 12 90 x 12 90 x 12 100 x 12 120 x 12 150 x 15
(*) Other profiles are also possible - - - - - -
Notching - - - - - -
Material thickness 10 10 12 13 13 16
Width - rectangle 45 45 40 52 60 60
Depth - rectangle 90 90 90 100 100 100
Depth - vee 60 60 60 70 80 80
Angle flange - max. profile 100 x 10 100 x 10 100 x 10 100 x 13 100 x 13 110 x 14
Working height 890 890 890 890 900 900
Corner notch - - - - - -
Maximum capacity 250 sq x 6 250 sq x 6 250 sq x 6 250 sq x 6 250 sq x 6 250 sq x 6
Tube notch - - - - - -
Maximum outside diameter 83 83 83 108 108 165
Bending - - - - - -
Bar bend max. capacity 250 x 12 250 x 13 250 x 15 250 x 20 250 x 22 250 x 25
Sheet bend max capacity 500 x 3 500 x 3 500 x 3 500 x 3 700 x 3 700 x 4
Punching at notch station - - - - - -
Throat depth 125 125 125 125 125 125
Maximum capacity 38 x 7 38 x 8 38 x 8 38 x 10 38 x 12 38 x 13
Technical data - - - - - -
Motorpower 5,5 kW 5,5 kW 7,5 kW 7,5 kW 7,5 kW 11 kW
Netto weight 1570 kg 1620 kg 1925 kg 2430 kg 3100 kg 550 kg
Gross weight 1695 kg 1740 kg 2095 kg 2640 kg 3370 kg 5970 kg
Machine dim. (LxWxH), cm 164 x 71 x 178 164 x 71 x 180 176 x 71 x 183 190 x 79 x 191 200 x 80 x 203 270 x 112 x 216
Packed dim. (LxWxH), cm 175 x 86 x 195 175 x 86 x 197 191 x 86 x 200 205 x 94 x 209 215 x 95 x 211 285 x 127 x 241


Major Tax Incentive For New Equipment Orders


Request Literature


Haco | Press Brakes | Shears | Notchers | Punches | Lasers | Plasma Cutting | Roll Bending | Sheet Metal Software | Ironworkers
Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact
Copyright © 2012 Machinery Consultants, Inc., all rights reserved.
1854 Business Center Drive · Duarte, CA 91010
Main Office: (626) 359-1944 · Orange County: (949) 481-6903 · Fax: (626) 359-4055
Terms of Service · Privacy Policy