Ironworkers COMPACT Range

The ‘Compact range are universal multi-purpose and compact hydraulic steelworkers developed for production purposes with maximum efficiency.

We offer 3 types in this range : COMPACT 40, 45 & 60

The ‘Compact 40’ is the most compact machine with 4 workstations for punching, cropping round and angle bars, cutting angle iron and shearing flat bar, whereas the Compact 45 and 60 have an additional notching station.

The punch station is designed to enable multiple punching applications. The universal bolster on Compact 45 and 60 offers the option of punching sheetmetal, flat bar, angle iron and the flange of channel and beam.. Tooling for special applications is available on simple request. Large heavy-duty tables with guides are part of the extensive range of standard equipment. The machines are equipped with blades for cropping round and square bars, optional blades are available for cutting U-, I-, T- and many other special profiles. Angle iron can be cut on 90° and/or 45° (through both flanges, internal and external). All blades have multiple cutting edges and can be reground. The shear is able to cut thin as well as thin material without the need for blade gap or cutting angle adjustments. Also flanges of angle profiles can be cut.

The universal steelworkers are delivered with an extensive range of standard equipment, such as large heavy-duty tables on the punch-, shear-, and notching station (on Compact 45 and 60). Easy adjustable holddowns to enable production in a safe and accurate way are fitted on every station. Free standing on suitable floor, they just need electrical connection to be ready to work The hydraulic circuit is activated by a shielded foot-pedal - the low power inch mode on each workstation enables the correct workpiece-positioning and tool-aligning. Stroke with automatic return.. Flanges from larger angle-iron can be mitre cut with the shear. Moreover, the compact 45 and 60 machines are equipped with centralised pressure lubrication - being one feature of the low maintenance requirements.

Standard

• Universal bolster for punching flat bar, angle iron and the flange of channel and / or beam.
• Punching up to 38 mm in the standard execution
• Large hole attachment for punching larger diameters available.
• Heavy-duty support table on the punch & the shear station and also the notch station (Compact 45 & 60) fitted as standard – all with the same working height.
• Low power inch mode and adjustable stroke on every station
• The Unique ‘Z’ – aperture on Compact 45 and 60 enables to cut angle iron on every angle, varying from 45° up to 90°, both internal and external (both flanges). Cutting flanges from large-sized angle-iron can be mitre cut with the shear. (see capacities)
• Rectangular notching applications. The notching station can optionally be transformed into a secondary punching station (Compact 45 and 60)
• Extended safety features as standard equipment
• Centralised pressure lubrication (on the Compact 45 & 60)
• High quality interchangeable bearings, seals and valves with well-known brand names, available from stockists.
• Machines with low maintenance requirements
• Single-phase execution available
• Possibility to use tooling from other brand names

Standard equipment

• Punch adaptors
• Swing away punch stripper unit
• Easy change punch holder
• Universal die bolster
• Heavy-duty support tables with guides at shear station and punch station.
• Heavy-duty support table with guides at notch station (Compact 45 & 60)
• Shear arm-blade with 4 cutting edges (Compact 40)
• Curved shear arm-blade with 2 (optinal: 4) cutting edges (Compact 45 & 60)
• Shear body blade with 4 cutting edges
• Section arm & body blade with 1 cutting edge
• Angle cutting arm & body blades with 4 cutting edges
• Rectangular notch bolster blades with 4 cutting edges (Compact 45 & 60)
• 1 metre ruled length stop (compact 45 and compact 60)
• Service toolkit
• Work station guards
• Instruction,operating and maintenance manual
• Hydraulic oil fill

Options

Minimum Deform Stripper Assembly

The minimum deform stripper assembly gives minimum deformation while punching close pitch holes in flat bar.

Quick-Change Punch Holder

Only needs to turn the punch holder by 90° to lock into position. Available up to 38mm capacity

Die Bolster for Punching Webs of Channel/Beam Section

Special designed punch holder for punching in the web of channel or beam. Bolsters for special profiles on demand.

Large Hole / Slot Attachment

Large hold unit for diameters up tp 110mm. Special shapes and applications also available on demand.

Specific section blades

Special blades for cropping either Channel, I Beam, T profiles, square or rund bar. Blades for many different and special profiles available on demand. These application need special holddown plate.

90 degree Vee Notch Unit

Vee Notch Unit - less than 90°

Flat Bar Bending Unit (Single Vee)

Capacities according to machine size.

Punching Attachment

1, 2 or 3 Metre Ruled Length Stops

The (optional) Touch and Cut ruled length stop can be used for the angle cutting, section cutting and shear station.

Adjustable Roller Material Supports

Movable 12v Halogen Lamp on Magnetic Base

Four anti-vibration machine mounts

Automatic Tool Lubricating System with 2 flexible nozzels on magnetic mounts (requiers an air supply)

Features

Angle Station

Unique ‘Z’ aperture makes it possible to cut angle iron on every angle varying from 45° up to 90°, both internal and external.

Notching Station (on Compact 45-60)

The notching station comes equipped with a rectangular notch unit as standard, complete with table and guides. The unit can be interchanged with a triangular notching unit ( available with angle from 22,5° up to 90° ).

In option a benging unit is also available on this station

Punch Station

The standard punch station enables punching holes with a diameter of up to 38 mm. Fully adjustable stroke.

Shearing/section cutting station

Shearing

Cutting thick as well as thin material without the need for blade gap or cutting-angle adjustments, the shear also enables cutting flanges of angle profiles. Specially designed blade approach angle to avoid the necessity to change blade settings when cutting thick or thin material and yet offer minimum distortion cropping.

Section cutting station

While cropping round and square solid bars in the standard setup, this station also allows optional blades for cropping channels, beams, Tee and many other special profiles.

Specifications

Major Tax Incentive For New Equipment Orders

Request Literature

Consider pre-owned alternatives?

• Atlantic HDS Hydraulic Shear
• Haco Euromaster 225-14-12 Hydraulic CNC Press Brake
• Haco Euromaster PPES 45 5 35 Press Brake

Haco | Press Brakes | Shears | Notchers | Punches | Lasers | Plasma Cutting | Roll Bending | Sheet Metal Software | Ironworkers

Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact