TCP Series Compact Combination Feeder/Straightener Reel Systems

Features

	Compact design, excellent for limited space applications and progressive dies
	Straightener/Feeder Reel assembled on common base weldment provides alignment of all units and easy location and installation with no special foundation. Base includes provisions for anchoring to floor.
	Digital controls and brushless servo motor provides excellent accuracy and repeatability performance
	Measurement wheel with encoder monitors movement of the strip for precise feed length. Actual movement of the material is measured, not the rotation of the rolls.
	Press PLS signals for hydraulic automatic release of all rolls for die pilot positioning of material
	Operator controls enable easy threading of the coil from the reel through straightener and into the die
	Remote pendant for die threading and setup
	Hydraulic powered pass-line 8" (200 mm) adjustment for easy setup of variuos jobs
	Press mounting tie-plate provided to assure system alignment
	Positioning +/- .003, no accumulation error
	Reel decoils by brake release and hydraulic drive start

	Optical sensor monitors loop and modulates reel drive speed for thin lightweight materials
	Coil keepers (6) on reel mandrel
	The straightener head consists of 9 work rolls in bank arrangement and 2 entry pinch rolls
	Rolls are closely centered to maximize straighteneing capability
	5 lower work rolls geared, upper 4 idle
	Direct gear drive to work rolls, no chains or belts; gears in oil bath
	All rolls are hardened 58/60 HRC
	Hydraulic motors control work roll depth settings
	Work roll depth indicated by mechanical and digital readouts on the control panel
	Hydraulic head opens wide 8" (200 mm) for easy threading of the coil and cleaning rolls
	Heavy-duty dual vertical roller (4 rollers) adjustable stock guides on the entry and exit of the machine
v	Hydraulic power is provided from the unit in reel
	Hydraulic mandrel expansion through durable linkage or wedge type mechanism
	Hold Down arm on reel maintains outer coil wrap when coil bands are removed

Specifications

SP Series 10,000 - 30,000 lbs. Capacity Combination Compact Straightener/Feeder/Reel
Max Width (in)	15	23	31	39	51	62
Max Width (mm)	400	600	800	1000	1300	1600
SMTCP & SMDTCP Single and Dual Reels
Thickness (in) min/max	.024/.156	.024/.156	.024/.156	.024/.156	.024/.156	.024/.156
Thickness (mm) min/max	.6/4	.6/4	.6/4	.6/4	.6/4	.6/4
Motorized Hydraulic Hold-Down Arm Roller	Std.	Std	Std	Std	Std	Std
Pneumatic Disc Brake	Std.	Std	Std	Std	Std	Std
Holding Brake	Std.	Std	Std	Std	Std	Std
Hydraulic Opening of Straightener Head	Std.	Std	Std	Std	Std	Std
Pilot Release of ALL ROLLS	Std.	Std	Std	Std	Std	Std
Hydraulic Peeler Table	Std.	Std	Std	Std	Std	Std
Remote Jog Pendant	Std.	Std	Std	Std	Std	Std
Photo-Optic Loop Control	Std.	Std	Std	Std	Std	Std
Hydraulic Motorized Setting of Straightener Head	Std.	Std	Std	Std	Std	Std
Mounting Plate	Std.	Std	Std	Std	Std	Std
72" Outside Diameter	Std.	Std	Std	Std	Std	Std
Siemens SL/7 Servo Control	Std.	Std	Std	Std	Std	Std
Hold-Down Arm for Threading material Into Straightener	Std.	Std	Std	Std	Std	Std
Coil Car	Option	Option	Option	Option	Option	Option
Coil Car Lift	Option	Option	Option	Option	Option	Option
Mandrel Extensions (3)	Option	Option	Option	Option	Option	Option
Automatic Coil Car	Option	Option	Option	Option	Option	Option
Automated Coil Keeper	Option	Option	Option	Option	Option	Option
Traversing Reel	Option	Option	Option	Option	Option	Option

Options

Standard lift (9.8"/250mm) Traversing Coil Car
Safe and easy way to load and unload coils

Extended lift (19.68"/500mm) Traversing Coil Car
Requires pit for installation

Coil Containment Arms
The neutral rollers on the hydraulically actuated arms are to keep the coil from opening while loading material into the straightener. They are strongly recommended when running thick and/or higher strength materials

Barrier Guard for back side of system
Shown here in safety red fencing and welded mechanical tubing

Mandrel I.D. Extensions for 21.6" - 25.6" (549mm - 650mm) diameter (set of 3)
For coil I.D.s larger than the standard 21.5" (546mm)

Major Tax Incentive For New Equipment Orders

Request Literature

Dynamic Feeds | Press Feeding | Straightening | Coil Handling Systems | Pallet Decoiling | Custom Solutions

Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact

Copyright © 2010 Machinery Consultants, Inc., all rights reserved.
1854 Business Center Drive · Duarte, CA 91010
Main Office: (626) 359-1944 · Orange County: (949) 481-6903 · Fax: (626) 359-4055
Terms of Service · Privacy Policy