FMCMCIIFN
Home
About
Inventory
Lines
Docs
Surplus
Tax
Leasing
Search
Location
Contact

Dynamic Feeds, Inc.
Cradle Straighter/Feeder

Features
Compact design, excellent for limited space applications
Cradle-Straightener-Feed assembled on common base weldment provides alignment of all units and easy location and installation
with no special foundation. All units are heavy plate welded construction. Base includes provisions for anchoring to floor.
Digital controls and brushless servo motor provides excellent accuracy and repeatability performance.
Measurement wheel with encoder monitors movement of the strip for precise feed length measurement. Actual movement of the
material is measured, not the rotation of the rolls.
Positioning +/- .003, no accumulation error
Press PLS signals for hydraulic automatic release of all rolls for die pilot positioning of material.
Operator console with control panel enables easy threading of the coil from the cradle through straightener and into the die.
Completely wired to operators control console.
Mechanical pass-line 3” (76mm) adjustment
Cradle decoils by brake release and hydraulic drive start.
Press mounting tie-plate provided to assure feed alignment.
Each cradle is equipped with side plates and (2 sets of 4) imbedded vertical rolls to assist in lateral coil guiding.
3 Hydraulically powered rolls assist in turning the outside coil diameter.
The straightener head consists of 9 work rolls in a bank adjustable arrangement along with 2 entry pinch rolls.
All straightening rolls are supported to prevent deflection.
Rolls are ideally centered to maximize straightening capability.
5 Lower work rolls are geared, the upper 4 rolls are idle.
Direct gear drive to work rolls, no chains or belts; gears run in a grease well.
All rolls are hardened 58/60 HRC.
Hydraulic motors control work roll depth settings.
Work roll depth indicated by dial indicators on the front of the straightener as well as digital readouts on the control panel.
Hydraulic head opens wide 8” (200mm) for easy threading of the coil and easy cleaning of the rolls.
§ Heavy-duty dual vertical roller (4 rollers) adjustable stock guides on the entry.
Hydraulic power is provided from unit in base of system.
Hold Down arms on cradle maintains outer
coil wrap when coil bands are removed.
Details
Performances TCX AE

Coil Range TCGS/P 600
Specifications
Model
 TCGS/C600AET5 TCGS/C600T5

Max. Coil Capacity
Per Mandrel

 10,000 lbs.
(5,000 Kg)		 10,000 lbs.
(5,000 Kg)
Max. Width 1.5 - 23”
(40 - 600 mm)		 1.5 - 23”
(40 - 600 mm)
Min. / Max. Thickness
Based on Mild Steel		 0.040” / 0.393” (1.0 – 10mm)
Full thickness cross-section 0.236” x 23” wide
Mild steel		 0.040” / 0.393” (1.0 – 10mm)
Full thickness cross-section 0.236” x 23” wide
Mild steel
Max. Outside Diameter 63”
(1600mm)		 63”
(1600mm)
Number of Rolls 9 Work, 2 Entry Pinch Rolls 9 Work, 2 Entry Pinch Rolls
Roll Diameter 3.93”
(100mm)		 3.93”
(100mm)
Passline Height Standard 47” (1200mm)*
*(Depends on Coil dimension)		 Standard 47” (1200mm)*
*(Depends on Coil dimension)
Voltage 480 Volts / 3 Phase / 60 Hz 480 Volts / 3 Phase / 60 Hz
Line Direction Standard: Right to Left
(Left to Right upon request)		 Standard: Right to Left
Left to Right upon request)
Color Standard: RAL#6011/Green
(Others available on customer request)		 Standard: RAL#6011/Green
(Others available on customer request)




Major Tax Incentive For New Equipment Orders


Request Literature


Dynamic Feeds | Press Feeding | Straightening | Coil Handling Systems | Pallet Decoiling | Custom Solutions
Home | About | Inventory | Lines | Docs | Surplus | Tax | Leasing | Search | Location | Contact
Copyright © 2010 Machinery Consultants, Inc., all rights reserved.
1854 Business Center Drive · Duarte, CA 91010
Main Office: (626) 359-1944 · Orange County: (949) 481-6903 · Fax: (626) 359-4055
Terms of Service · Privacy Policy